Drive Belt: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Drive Belt Replacement

Special Tools Required

- Belt Tension Release Tool Snap-on YA9317, commercially available
*Available through the Acura Tool and Equipment Program, 888-424-6857.

1. Remove the right upper fender trim .

2. Remove the engine cover Service and Repair.

3. Move the auto-tensioner (A) using the belt tension release tool (YA9317) in the direction shown to relieve tension from the drive belt, then remove the drive belt.

4. Install the new drive belt in the reverse order of removal.