Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Acura >> 1991 >> Legend Base, Automatic >> Repair and Diagnosis >> Electrical >> Starter >> On-Vehicle Testing >> Starter Function Test

Starter Function Test

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Disconnect wire harness connector from ignition coil. On vehicles with manual transmission, depress clutch pedal to floor. On all models, turn ignition switch to START position. Starter should crank.
    NOTE: On vehicles with manual transmission, starter will not crank unless clutch pedal is fully depressed.
  2. If starter does not crank, check battery condition. Check for loose and corroded battery cables and starter wires. If starter still does not crank, unplug Black/White connector from starter solenoid.
  3. Connect jumper wire between positive battery terminal and solenoid terminal. Starter should crank. If starter still does not crank, remove starter, and check for internal problems.
scientia non olet · About Brad's Car Manuals