Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Acura >> 1991 >> Legend Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Code 13: Atmospheric (Pa) Sensor

Code 13: Atmospheric (Pa) Sensor

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Turn ignition off. Remove ACG fuse in underdash fuse box for 10 seconds to reset ECU. Start engine, and connect jumper wire to diagnostic connector. Observe CHECK ENGINE light. If light does not flash, problem is intermittent. Test drive, and check again.
  2. If CHECK ENGINE light flashes Code 13, substitute a known good ECU, and recheck. If condition goes away, replace ECU (PA sensor is built into ECU).