Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Acura >> 1992 >> Integra GS-R >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Computerized Engine Controls >> Electronic Control Unit (Ecu) >> Ground Circuits

Ground Circuits

Download the full database via torrent (~1.1 TB)
  1. Measure resistance to ground on ECU terminals A23, A24, A26, and B2. Resistance should be zero ohms. If not, repair open to ground.
  2. Using a DVOM, connect negative lead to a good ground. Backprobe each ground terminal. With vehicle running, voltmeter should indicate less than one volt. If voltmeter reading is greater than one volt, check for open, corrosion, or loose connection on ground lead.
scientia non olet · About Brad's Car Manuals