Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Acura >> 1992 >> Vigor LS, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Idle Control System >> Engine Controls - System/Component Tests >> Starter Signal

Starter Signal

Download the full database via torrent (~1.1 TB)

Connect PGM-FI test harness between ECU and vehicle harness. Measure voltage on PGM-FI test harness terminals B9 (positive) and A26 (negative) with ignition switch in START position. If battery voltage is present, starter signal is okay. If voltage is not present, inspect fuse No. 18. If fuse is okay, repair open in Blue/White wire between ECU and fuse No. 18.

scientia non olet · About Brad's Car Manuals