Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Acura >> 1993 >> Integra GS-R >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Idle Control System >> Starter Signal

Starter Signal

Download the full database via torrent (~1.1 TB)

Connect ECM test harness between ECM and harness connector. Measure voltage on ECM test harness terminals B9 (positive) and A26 (negative) with ignition switch in START position. See Figure . If battery voltage is present, starter signal is okay. If voltage is not present, inspect fuse No. 18. If fuse is okay, repair open in Blue/White wire between ECM and fuse No. 18.

scientia non olet · About Brad's Car Manuals