Integrated Control Unit

Remove integrated control unit from underdash fuse and relay panel. Test each circuit of integrated control unit connector for continuity or voltage as indicated. SeeFig 1 - Fig 5 . Correct any problems found. If no problems are found, replace integrated control unit.

Fig 1: Integrated Control Unit Connector Terminal ID (1 Of 2)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Integrated Control Unit Connector Terminal ID (2 Of 2)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 3: Testing Integrated Control Unit (1 Of 3)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 4: Testing Integrated Control Unit (2 Of 3)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 5: Testing Integrated Control Unit (3 Of 3)

Courtesy of AMERICAN HONDA MOTOR CO., INC.