Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Acura >> 1994 >> Integra GS-R, 2D Coupe >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Trouble Codes >> Code 13: Barometric (BARO) Sensor

Code 13: Barometric (BARO) Sensor

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
NOTE: Barometric sensor is built into ECM. Circuit testing is not required.
  1. Turn ignition off. Remove BACK-UP fuse (7.5-amp) from underhood fuse/relay box for 10 seconds to reset ECM.
  2. Check ECM for fault codes. If Code 13 is not present, problem is intermittent. Check for poor connections at ECM connector and Transmission Control Module (TCM) connector (if equipped). Test drive vehicle and check again. If Code 13 is present, replace ECM and retest.
scientia non olet · About Brad's Car Manuals