Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Acura >> 1994 >> Integra GS-R, 4D Sedan >> Repair and Diagnosis >> Electrical >> Starter >> On-Vehicle Testing >> Cranking Test

Cranking Test

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Connect a voltmeter and ammeter to battery. See Fig 1 . Disconnect connector from distributor. Ignition control module is located on right side of engine compartment.
  2. Use remote starter switch to crank engine. Check cranking voltage and current draw. Ensure voltage is at least 8 volts. Current draw should be less than 350 amps. Cranking speed should be greater than 100 RPM.
Fig 1: Connecting Voltmeter & Ammeter For Cranking Test
G29428Courtesy of AMERICAN HONDA MOTOR CO., INC.