Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Acura >> 1996 >> SLX >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Fuel System >> Idle Control System >> Idle Air Control (IAC) Valve

Idle Air Control (IAC) Valve

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Disconnect harness connector to motor. Check resistance across IAC coil terminals "A" to "B" and "C" to "D". Resistance should be 40-80 ohms. If okay, go to next step. If resistance is not as specified, replace IAC valve.
  2. Check resistance between IAC terminals "B" to "C" and "A" to "D". Resistance should be infinite. If resistance is not as specified, replace IAC valve.
    NOTE: Functional testing of Idle Air Control (IAC) valve requires a bidirectional scan tool capable of cycling PCM output devices or a special IAC Driver and Noid Light Set (222L or J-37027 ).
    Fig 1: Identifying Idle Air Control (IAC) Connector Terminals
    G96B10109Courtesy of ISUZU MOTOR CO.
scientia non olet · About Brad's Car Manuals