Power Mirror Test

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Remove door panel. See DOOR PANEL under REMOVAL & INSTALLATION. Disconnect power mirror 10-pin connector. See Fig 1 . Connect battery power to power mirror as specified in POWER MIRROR TEST table. If power mirror fails to function as specified, replace faulty power mirror. See POWER MIRROR under REMOVAL & INSTALLATION.

Fig 1: Identifying Power Mirror Connector Terminals

Courtesy of AMERICAN HONDA MOTOR CO., INC.

POWER MIRROR TEST

Position	Battery (+) & (-)
Tilt Up	10 & 9
Tilt Down	9 & 10
Swing Left	9 & 8
Swing Right	8 & 9