Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Acura >> 2002 >> 3.2CL Base >> Repair and Diagnosis >> Electrical >> Starters >> Bench Testing >> Brush Holder Test

Brush Holder Test

Download the full database via torrent (~1.1 TB)
  1. Using an ohmmeter, check continuity between positive and negative brush holders (brackets). See Fig 1 . Continuity should not exist. If continuity exists, brush holder assembly is shorted and must be replaced.
  2. Measure brush length. If it is not within the service limit,replace the brush holder assembly. See Fig 2 .
Fig 1: Identifying Brush Holders
G00012267Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig 2: Inspecting Starter Brushes
G00308255Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About Brad's Car Manuals