Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Acura >> 2004 >> TL Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> A/T Interlock System >> Shift Lock Solenoid Replacement

Shift Lock Solenoid Replacement

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove the center console (see CENTER CONSOLE REAR SECTION REMOVAL/INSTALLATION ).
  2. Release the tab (A) retaining the shift lock solenoid.
  3. Fig 1: Removing/Installing Shift Lock Solenoid
    G01835858Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Raise the shift lock solenoid bushing (B) just enough to slide the shift lock solenoid out.
  5. Install the shift lock solenoid plunger (C) and plunger spring (D) in the new shift lock solenoid (E).
  6. Apply silicon grease to joint of the shift lock solenoid plunger, if necessary.
  7. Install the new shift lock solenoid by aligning the joint of the shift lock solenoid plunger with the tip of the shift lock stop (F).
  8. Install the center console (see CENTER CONSOLE REAR SECTION REMOVAL/INSTALLATION ).