Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Acura >> 2007 >> MDX V6-3.7L >> Repair and Diagnosis >> Windows and Glass >> Windows >> Power Window Control Module >> Testing and Inspection >> Component Tests and General Diagnostics >> Driver's MPCS Unit Input Test

Driver's MPCS Unit Input Test

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Driver's MPCS Unit Input Test
1. Turn the ignition switch OFF.
2. Remove the driver's door panel.




3. Disconnect the driver's MPCS unit (A) connectors A (40P) and B (14P).
4. Inspect the connector and socket terminals to be sure they are all making good contact.
- If the terminals are bent, loose or corroded, repair them as necessary and recheck the system.
- If the terminals look OK, Go to step 5.




5. With the connector still disconnected, make these input tests at the connector.
- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, Go to step 6.




6. Reconnect the connector, and make these input tests at the connector.
- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, replace the driver's MPCS unit, then go to step 7.

7. Reset the power window control unit.