Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Acura >> 2008 >> RL V6-3.5L >> Repair and Diagnosis >> Windows and Glass >> Windows >> Power Window Control Module >> Testing and Inspection >> Component Tests and General Diagnostics >> Driver's MPCS Unit Input Test

Driver's MPCS Unit Input Test

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Driver's MPCS Unit Input Test

1. Turn the ignition switch OFF.
2. Remove the driver's door panel.
3. Disconnect driver's MPCS unit (A) connectors A (40P) and B (14P).






4. Inspect the connector and socket terminals to be sure they are all making good contact.
- If the terminals are bent, loose or corroded, repair them as necessary and recheck the system.
- If the terminals look OK, go to step 5.

5. With the connectors still disconnected, make these input tests at the connectors.
- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, go to step 6.






6. Reconnect the connectors to the driver's MPCS unit, and make these input tests at the connectors.
- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, the control unit must be faulty; replace the driver's MPCS unit and go to step 7.






7. Reset the power window control unit.