Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Acura >> 2008 >> TL Base >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System >> Ignition Coil Removal/Installation

Ignition Coil Removal/Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove the right side engine compartment cover (A), then remove the left rear engine compartment cover (B) and right rear engine compartment cover (C).
    Fig 1: Identifying Right Side Engine Compartment Cover
    G05457438Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the engine cover.
    Fig 2: Identifying Engine Cover
    G05457439Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the ignition coil connectors (A), then remove the ignition coils (B).
    Fig 3: Ignition Coil Connectors With Torque Specification
    G05457440Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the ignition coils in the reverse order of removal.
scientia non olet · About Brad's Car Manuals