Drive Belt Replacement

Special Tools Required 

Belt Tension Release Tool Snap-on TK9317, commercially available

^* : Available through the Acura Tool and Equipment Program, 888-424-6857.

1. Remove the engine compartment covers (see ENGINE COMPARTMENT COVER REPLACEMENT ).
2. Move the auto-tensioner (A) using the belt tension release tool (TK9317) in the direction of the arrow to relieve tension from the drive belt, then remove the drive belt.
   Fig 1: Moving Auto-Tensioner Using Belt Tension Release Tool

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
3. Install the new drive belt in the reverse order of removal.
4. Install the engine compartment covers (see ENGINE COMPARTMENT COVER REPLACEMENT ).