Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> American Motors >> 1980 >> AMX Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Ignition System >> MOTORCRAFT Solid State Ignition System >> Overhaul >> Distributor >> Disassembly

MOTORCRAFT Solid State Ignition System: Overhaul: Distributor: Disassembly

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove distributor cap and rotor. Using suitable gear puller (J-28509), remove trigger wheel (two screwdrivers can be used to pry trigger wheel upward). Remove pin.
  2. Remove sensor retainer and washers from pivot pin on base plate. Remove ground screw from harness tab. Lift sensor assembly from distributor. If replacement is necessary, remove vacuum unit.