Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Audi >> 1978 >> 5000 Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Ignition System >> BOSCH Single Breaker Point Distributors >> Adjustments >> Vacuum Advance

Vacuum Advance

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. With distributor in test stand, check advance at vacuum settings shown in specifications. See appropriate DISTRIBUTOR ADVANCE SPECIFICATIONS table in this section. Replace vacuum unit if tests indicate vacuum diaphragm unit is inoperative, out of calibration, or leaking.
  2. Most types of vacuum diaphragm units are factory pre-set and cannot be adjusted. However, on some dual diaphragm vacuum units, vacuum advance may be increased or decreased by turning an Allen screw located on end of diaphragm unit.