Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Audi >> 1986 >> 5000 CS, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - BOSCH Cis-E >> Testing >> Electrical Components >> Lambda Control

Lambda Control

Download the full database via torrent (~1.1 TB)
  1. Connect test harness between differential pressure regulator and vehicle harness. Connect multimeter to test harness. Disconnect wiring from coolant temperature sensor. Plug jumper end of test resistor into harness connector of temperature sensor. Unplug oxygen sensor. Turn ignition on.
  2. Differential pressure regulator current should be 9-11 mA. Ground Green wire of oxygen sensor. Differential pressure regulator current should increase to 19-22 mA. If not, check wiring from terminal No. 8 of ECU connector to oxygen sensor. If wiring is correct, replace ECU.
scientia non olet · About Brad's Car Manuals