Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Audi >> 1991 >> 200 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> 2.2L >> Ignition Coil Resistance Check

Ignition Coil Resistance Check

Download the full database via torrent (~1.1 TB)
  1. Using ohmmeter, check ignition coil primary and secondary resistance. Disconnect coil primary and secondary ignition leads. Connect ohmmeter leads across primary terminals No. 1 and No. 15 at coil. See Figure . Resistance value should be .5-1.5 ohms.
  2. Connect ohmmeter leads between positive terminal No. 1 and coil high voltage tower. See Figure . Secondary resistance value should be 5000-9000 ohms. If resistance values are not as specified, replace ignition coil.
scientia non olet · About Brad's Car Manuals