Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Audi >> 1995 >> Cabriolet 2.8 L >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Crankshaft Position (CKP) Sensor

Crankshaft Position (CKP) Sensor

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches

Disconnect CKP sensor connector (located on left side of cylinder block). Measure resistance between specified terminals of CKP sensor connector. See Fig 1 . See CKP SENSOR RESISTANCE table. If resistance is not as specified, replace CKP sensor. If resistance is as specified, check wiring between CKP sensor and PCM. If wiring is okay, replace PCM.

CKP SENSOR RESISTANCE

Terminals No. Ohms
1 & 2 1000
1 & 3 0
2 & 3 0
Fig 1: Identifying CKP Sensor Connector Terminals (Cabriolet)
G93J80993Courtesy of AUDI OF AMERICA, INC.