Window Switches
Remove window switch to be tested and disconnect harness connector. Check continuity between switch terminals with switch in appropriate position. Refer to the POWER WINDOW SWITCH TEST table. See Fig 1 . If continuity is not as specified, replace window switch.
POWER WINDOW SWITCH TEST
| Switch Position | Check Between Terminals No. | Specification |
|---|---|---|
| Up | 1 & 4 | Continuity |
| Neutral | 2 & 5 | Continuity |
| 1 & 3 | Continuity | |
| 2 & 4 | No Continuity | |
| 1 & 4 | No Continuity | |
| Down | 2 & 4 | Continuity |