Windshield Projection Head Up Display Control Module, Removing And Installing: Removing

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the upper cover, refer to Overview - Front Door Trim Panel .

-- Cover the control module -3- with a soft towel.

Fig 1: Identifying Windshield Projection Head Up Display Control Module, Screws And Connector

Courtesy of AUDI OF AMERICA, LLC

-- Remove the windshield, refer to Windshield .

-- Remove the bolts -1, 2 and 5-.

-- Lift the control module slightly and disconnect the connector -4-.

-- Remove the control module.