Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> BMW >> 1982 >> 733i Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> BMW MOTRONIC Emission Control System >> Testing >> Test 5: Idle Control Valve

Test 5: Idle Control Valve

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Valve should be open when vehicle is at rest (no voltage to valve). When voltage is applied to valve (engine on), valve should close. Remove 2 valve hoses and observe valve operation. If valve does not operate as described, replace valve.
  2. If valve operates properly, pull off connector plug and connect voltmeter between the 2 wires in plug. Start engine and turn A/C on. Voltmeter should read battery voltage. If it does not, see TEST 6  for idle control unit.
scientia non olet · About Brad's Car Manuals