Starter Specifications
STARTER SPECIFICATIONS
| Application | Specification |
|---|---|
| Brush Length | .51" (13.0 mm) Minimum |
| Commutator Diameter | 1.319" (33.5 mm) Minimum |
| Cranking Voltage | 12 Volts Minimum |
| Starter Current Draw | 170 Amps Maximum |
| Starter Speed | N/A |
| Starter Solenoid Hold-In Current Draw | 7.5 Amps |
| Starter Solenoid Pull-In Current Draw | 40 Amps |