Battery Replacement: Notes

Batteries determined to be defective through testing procedures should be replaced using the following guidelines.

• Reconfirm battery is actually defective and it does not need charging.
• Insure that ignition switch is in "Off" position and engine is not running.
• Disconnect negative battery terminal first.
• Place negative battery cable in a position so that it can not come in contact with battery during removal process.
• Reinstall battery hold down clamp.
• Install positive cable first.
• Recheck output of vehicle generator and balance of electrical system for other problems.
• Provide clear and concise description of the defect including cell readings, load test results and any other pertinent information which led to the battery replacement.
• Tag battery with VIN and repair order number.