Body Control Module Replacement

Fig 1: Body Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the instrument panel wiring harness junction block. Refer to Instrument Panel Wiring Harness Junction Block Replacement .
1	Body Control Module Procedure Disconnect the electrical connectors on the body control module. Unsnap to release the module from the bracket. For programming and set up information, refer to Control Module References .

Callout

Component Name

Preliminary Procedure:
Remove the instrument panel wiring harness junction block. Refer to Instrument Panel Wiring Harness Junction Block Replacement .

Body Control Module

Procedure