Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Buick >> 2018 >> Enclave Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Programming And Setup - All Systems) >> Repair Instructions >> Front View Camera Module Programming and Setup >> Front View Camera Module Reprogramming

Front View Camera Module Reprogramming

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
WARNING: This page is about a different car, the 2017 GMC Acadia Limited, 2017 Chevrolet Traverse, and 2017 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Do not reprogram the frontview camera module, unless directed by a service procedure, or a service bulletin.

To program an existing frontview camera module, perform the following procedure:

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, select K109 Frontview Camera Module - Programming and follow the on-screen instructions.
  3. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
scientia non olet · About Brad's Car Manuals