Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Buick >> 2020 >> Envision Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (Programming And Setup) >> Repair Instructions >> K36 Inflatable Restraint Sensing and Diagnostic Module: Programming and Setup >> Programming an Existing or New Control Module

Programming an Existing or New Control Module

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
WARNING: This page is about a different car, the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.

To program an existing or new control module, perform the following procedure:

  1. Ignition - On/Vehicle - In Service Mode
  2. Access SPS and follow the on-screen instructions for the control module: K36 Inflatable Restraint Sensing and Diagnostic Module
  3. Perform the SPS function: Programming and Setup
scientia non olet · About Brad's Car Manuals