Scan Tool Data Definitions
- Battery Voltage
-
The scan tool displays the battery system voltage.
- Last RFA Cmd Since Wake-Up
-
The scan tool displays the last RFA commanded message from the BCM. The scan tool displays NONE when the BCM awakens from asleep status without receiving a RFA module request from a programmed key fob. The scan tool displays LOCK, UNLOCK or PANIC when the BCM is awake and a command is activated from the key fob to the RFA module.
- RFA Message Since Wake-Up
-
The scan tool displays the last message sent to the BCM from the remote control door lock receiver.