Seat Temperature Control Module: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

HEATED SEAT CONTROL MODULE REPLACEMENT - FRONT

REMOVAL PROCEDURE

1. Remove the front seat cushion.

CAUTION: Refer to SIR Caution.

2. Disconnect the electrical connector from the heated seat module.
3. Remove the heated seat module screws (2) and remove the module.

INSTALLATION PROCEDURE

1. Install the heated seat control module and install the retaining screws (2).

NOTE: Refer to Fastener Notice.

Tighten the screws to 2 N.m (18 lb in).
2. Connect the electrical connector.
3. Install the seat cushion.
4. Refer to Control Module References for programming and setup information.