Door Control Module Replacement

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Door Control Module Replacement

Removal Procedure

1. Remove the door trim panel.

2. Remove the door control module (1) by releasing the retainer tabs (2).

3. Disconnect the electrical connectors (1) from the control module (2).

Installation Procedure

1. Connect the electrical connectors (1) to the control module (2).

2. Snap the door module (1) onto the mounting studs (2).
3. Install the door trim panel.
4. Refer to Control Module References for programming and setup information. Programming and Relearning