Vehicle Stability Control Module Programming and Setup

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Vehicle Stability Control Module Programming and Setup

Vehicle Stability Control Module (VSCM) Replacement and Setup

The following service procedures require either a programming or a setup event performed for a complete repair.

If the vehicle stability control module (VSCM) is replaced, the following procedures must be performed in the following order:

* VSCM Reprogramming-Refer to Service Programming System (SPS) (Programming and Relearning) .
* Revise the steering position sensor centering setup procedure using the Scan Tool module setup function.
* Revise the acceleration sensor reset procedure using the Scan Tool module setup function
* Revise the VSCM power steering reset procedure using the Scan Tool module setup function.