Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Cadillac >> 2021 >> CT4 V, RWD >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup >> Repair Instructions >> K124 Image Processing Module: Programming and Setup (without UKL) >> Replace and Program K124 Image Processing Module or Reprogram K124 Image Processing Module

Replace and Program K124 Image Processing Module or Reprogram K124 Image Processing Module

Download the full database via torrent (~1.1 TB)
NOTE:

Due to continuous improvements, the on screen selections may vary from instructions below.

To program a replacement or an existing K124 Image Processing Module, perform the following procedure:

  1. Ignition/Vehicle OFF
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select K124 Image Processing Module - Programming and follow the on-screen instructions.
  4. Clear DTCs.
scientia non olet · About Brad's Car Manuals