Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chevrolet >> 1975 >> Hi-Cube Automatic Trans >> Repair and Diagnosis >> Steering >> Steering Linkage >> All Models >> Relay Rod Removal

Relay Rod Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove inner ends of tie rods from relay rod (on models where applicable). Remove relay rod ball stud cotter pins and castellated nuts. Remove relay rod from pitman and idler arms by tapping on relay rod ball stud bosses with a hammer, while using another hammer as a backing.
  2. To install, reverse removal procedure and note following: Check ball studs and nuts for clean and smooth threads. Check stud seals and replace if necessary. Torque nuts and install new cotter pins.