Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chevrolet >> 1986 >> Sprint ER, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Feedback Carburetor System >> Testing >> Oxygen Sensor

Oxygen Sensor

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Warm engine to normal operating temperature. Disconnect oxygen sensor connector.
  2. Connect voltmeter between oxygen sensor side terminal (of disconnected connector) and ground. See Fig 1 T apply voltage to oxygen sensor.
    Fig 1: Connecting Voltmeter to Oxygen Sensor
    G42236
  3. With engine at 1500-2000 RPM, turn WOT microswitch on by moving microswitch lever. See Fig 2 that voltmeter reads about .8 volts.
    Fig 2: Moving WOT Microswitch Lever
    G42237
  4. With engine at 1000-1500 RPM, disconnect vacuum hose at intake manifold. Check that voltmeter reads near zero. Reconnect vacuum hose and oxygen sensor connector.
scientia non olet · About Brad's Car Manuals