Grind Complete

Includes: Remove carbon, check surfaces for warpage, reface or replace Valves, resurface Valve Seats and clean Valve Guides. Adjust Valves (where applicable).

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
3.4L Eng, Both Heads		12.8		A
Combination Procedure: ROCKER ARM ASSEMBLY: Disassemble & Assemble: Includes: Clean and replace necessary components only.
Both		0.6		B
One		0.3		B
Combination Procedure: ROCKER ARM STUD: Remove & Replace:
Each Additional		0.2		B
One		0.3		B
Combination Procedure: VALVE SPRING ASSEMBLED HEIGHT: Correct:
Per 3 Springs		0.2		A