Starter Specifications
STARTER SPECIFICATIONS
| Application | Specification | ||
|---|---|---|---|
| Brush Length | .394-.610" (10.0-15.5 mm) | ||
| Brush Spring Tension | 43-85 ozs. (1.2-2.4 kg) | ||
| Commutator Insulation Depth | .008-.024" (.2-.6 mm) | ||
| Commutator Outside Diameter | 1.14-1.18" (28.9-30.0 mm) | ||
| Commutator Runout | .002-.016" (.05-.41 mm) | ||
| Solenoid Contact Plate Wear | |||
| Maximum | .035" (.9 mm) | ||
| Starter Current Draw | |||
| No-Load | 90 Amps At 11.5 Volts | ||
| Load | |||
| Automatic Transaxle (92 INCH Lbs. Torque) | 300 Amps At 7.7 Volts | ||
| Manual Transaxle (80.5 INCH Lbs. Torque) | 300 Amps At 7.7 Volts | ||
| Locked Rotor | |||
| Automatic Transaxle (18.8 Ft. Lbs. Torque) | 980 Amps At 4.0 Volts | ||
| Manual Transaxle (13.8 Ft. Lbs. Torque) | 780 Amps At 4.0 Volts | ||