Throttle Position Sensor: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

REMOVAL PROCEDURE
1. Disconnect TP sensor electrical connector.
2. Remove both fasteners (3).
3. Remove the TP sensor (2).

INSTALLATION PROCEDURE
1. Install TP sensor (2).

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Tighten both fasteners.

Tighten
Tighten both fasteners to 3.5 N.m (30 lb in).

3. Connect the TP sensor electrical connector.