Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chevrolet >> 2002 >> Tracker 2WD L4-2.0L VIN C >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Knock Sensor >> Service and Repair

Knock Sensor: Service and Repair

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
REMOVAL PROCEDURE




1. Disconnect the knock sensor (KS) electrical connector.
2. Remove the KS (1) from the engine block.

INSTALLATION PROCEDURE




1. Install the KS (1) to the engine block.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Secure the KS to the engine with the bolt.

Tighten
Tighten the bolt to 23 N.m (17 lb ft).

3. Connect the KS electrical connector.