Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chevrolet >> 2004 >> Classic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Introduction) - 2.2L (L61) >> Repair Instructions >> Filler Tube Replacement >> Installation Procedure

Installation Procedure

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
    Fig 1: Identifying Fuel Filler Pipe Attaching Screw
    GM783458Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel filler pipe.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the fuel filler pipe attaching screw to the under body.

    Tighten:  Tighten the fuel filler pipe attaching screw to 10 N.m (89 lb in).

  4. Fig 2: View of Fuel Filler Hose
    GM783454Courtesy of GENERAL MOTORS CORP.
  5. Install the fuel filler hose.
  6. Position the fuel filler hose clamp at the fuel tank and fuel fill tube.

    Tighten:  Tighten the fuel tank filler hose clamps to 3 N.m (27 lb in).

  7. Lower the vehicle.
  8. Fig 3: View of Fuel Filler Pipe
    GM783460Courtesy of GENERAL MOTORS CORP.
  9. Install the fuel filler pipe retainers to the fuel filler pipe access panel.
  10. Install the fuel filler cap.