Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chevrolet >> 2004 >> Impala LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System 3.8L (Introduction) >> Repair Instructions >> Knock Sensor (KS) 1 Replacement >> Removal Procedure

Removal Procedure

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Raise and support the vehicle. Refer toLifting and Jacking the Vehicle in General Information.
  2. Drain the cooling system. Refer toDraining and Filling Cooling System in Engine Cooling.
  3. Disconnect the knock sensor electrical connector (2).
  4. Remove the knock sensor (1).
  5. Fig 1: Removing KS Sensor (1)
    GM892627Courtesy of GENERAL MOTORS CORP.