Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chevrolet >> 2004 >> Impala LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System 3.8L (Introduction) >> Repair Instructions >> Mass Air Flow (MAF) Sensor Replacement >> Removal Procedure

Removal Procedure

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement in Engine Mechanical - 3.8L.
  2. IMPORTANT: The mass air flow (MAF) sensor is attached to the throttle body assembly.
  3. Disconnect the MAF sensor electrical connector (8).
  4. Remove the MAF sensor screws (9).
  5. Remove the MAF sensor (1).
  6. Fig 1: Removing MAF Sensor
    GM378168Courtesy of GENERAL MOTORS CORP.