Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chevrolet >> 2005 >> SSR Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 6.0L - Introduction >> Repair Instructions >> Camshaft Position (CMP) Sensor Replacement >> Removal Procedure

Removal Procedure

Download the full database via torrent (~1.1 TB)  |  Custom patches
    Fig 1: Removing/Installing Camshaft Position Sensor Assembly, Jumper Harness & Front Cover
    GM1484001Courtesy of GENERAL MOTORS CORP.
  1. Remove the generator mounting bracket. Refer to Generator Bracket Replacement in Engine Electrical.
  2. Remove the camshaft position sensor mounting bolts (1).
  3. Remove the camshaft position sensor assembly (4, 5, 6) from the front cover assembly (7).
  4. Disconnect the camshaft position sensor jumper harness (2) and the engine harness (3) electrical connectors.
  5. Separate the camshaft sensor (5) and O-ring (6) from the jumper harness (4). Discard the O-ring and use NEW only.
scientia non olet · About Brad's Car Manuals