Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Body Control Module Replacement >> Installation Procedure

Installation Procedure

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
    Fig 1: View Of Electrical Connectors
    GM440108Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors to the BCM.
    2. Fig 2: View Of Body Control Module
    GM440103Courtesy of GENERAL MOTORS CORP.
  2. Align the tabs on the BCM with the slots in the mounting bracket. Push the BCM up until the module clicks into place.
  3. Install the right side I/P insulator.
  4. Connect the negative battery cable. Refer to ENGINE ELECTRICAL .
  5. Setup the BCM customized options.
scientia non olet · About Brad's Car Manuals