Seat Temperature Control Module: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Heated Seat Control Module Replacement - Front

Removal Procedure

1. Remove the seat.

2. Remove the plastic fasteners securing the heated seat control module to the seat cushion foam support wires.
3. Disconnect the harness connectors.
4. Remove the heated seat control module from the seat.

Installation Procedure

1. Position the heated seat module to the seat cushion foam support wires.
2. Secure the heated seat module to the seat cushion foam support wires with tie straps.
3. Connect harness connectors to the memory seat control module.

4. Install the seat.
5. Reprogram the Heated Seat Module. Refer to Heated Seat Control Module Programming and Setup.
6. Refer to Control Module References for programming and setup information. Programming and Relearning