Keyless Entry Receiver: Testing and Inspection

Download the full database via torrent (~1.1 TB)

Remote Control Door Lock Receiver Programming and Setup

Remote Control Door Lock Receiver Replacement

If the remote control door lock receiver is replaced, the following procedures must be performed:

1. RCDLR Programming - Refer to Service Programming System (SPS). Programming and Relearning
2. Keyless Entry Transmitter Programming - Refer to Transmitter Programming. Programming and Relearning
3. Tire Type Setup:

1. Install a scan tool.
2. Select Remote Control Door Lock Receiver under Module Setup in the Vehicle Control System menu.
3. Select Tire Type/Pressure Selection.
4. Follow the on-sceen instructions.

4. Tire Pressure Monitoring Sensor Learn - Refer to Tire Pressure Sensor Learn.

Replacing Keyless Entry Transmitters

If a keyless entry transmitter is replaced, the following procedure must be performed:

Keyless Entry Transmitter Programming-Refer to Transmitter Programming. Programming and Relearning