Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Chevrolet >> 2008 >> Optra LS, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 1.6L >> Repair Instructions >> Throttle Body Assembly Replacement >> Installation Procedure

Installation Procedure

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
    Fig 1: View Of Throttle Body Cable And Coolant Hoses
    GM1289412Courtesy of GENERAL MOTORS CORP.
  1. Install the throttle body assembly to the intake manifold.
    2. NOTE: Refer to Fastener Notice .
  2. Install the throttle body retaining nuts and the bolt.

    Tighten:  Tighten the throttle body retaining nuts and the bolt to 15 N.m (11 lb ft)  .

  3. Connect the throttle cable.
  4. Connect the coolant hoses.
    5. Fig 2: Identifying Breather Hose
    GM1289411Courtesy of GENERAL MOTORS CORP.
  5. Connect the breather hose.
  6. Install the intake air tube.
  7. Connect the negative battery cable.
scientia non olet · About Brad's Car Manuals