Replace and Program Electronic Brake Control Module or Reprogram Electronic Brake Control Module

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

To program a replacement or an existing Electronic Brake Control Module, perform the following procedure:

Access the Service Programming System (SPS) and follow the on-screen instructions.
On the SPS Supported Controllers screen, select Electronic Brake Control Module - Programming and follow the on-screen instructions.
On the SPS Supported Controllers screen, select Electronic Brake Control Module - Setup and follow the on-screen instructions.
At the end of programming, choose the "Clear All DTCs" function on the SPS screen.